Product description: KZLS-32 Pneumatic split steel strapping is a new type of pneumatic strapping tools, combined with the completion of the two machines strapping operations, light weight, strong, easy to operate, tightly applied to the coil, profiles, pipes , sheet ingot, steel, irregular surfaces and large objects bundled package, a standardized, standardization and internationalization of packaging essential tools. KZL-32 pneumatic steel tensioning machine 19,25,32mm steel can be generic, KZS-32 lock machine can play 19,25,32mm choose one strip. Advantages: 1. Small, easy to use, cost-effective. 2. Shanghai Yu made the use of foreign advanced technology and durability. 3. The gas supply operations, tightening efforts, good and stable performance. Separate pneumatic steel strapping requirements: 1, the installation must be installed air filters (oil and water separator), filter impurities, moisture into the baler 2, the average pressure of 0.6Mpa (based on the actual situation of the actual plant can be equipped with tank ) 3, packer and compressor pipe diameter is generally linked to the interior strength of 8MM, outside diameter 12MM, pipe length not more than 15 meters Technical parameters: Model: KZL-19/25/32/40-type pneumatic steel mm strip tensioning speed (25 ~ 32) × (0.8 ~ 1.2):: belt tensioning machine strapping material: steel using air pressure: 0.4 ~ 0.6Mpa Use steel specification 5.3m / min tensioning: ≥ 9.8KN / 0.6Mpa Total Weight: 4.8kg